Home » Products » Consumer Electronics » Kitchen Electronics » Food Processors

Injection Front Bumper Mould

Price:
Negotiable
minimum:
Total supply:
Delivery term:
The date of payment from buyers deliver within days
seat:
Zhejiang
Validity to:
Long-term effective
Last update:
2020-05-25 23:00
Browse the number:
327

Send an inquiries

Company Profile

TS Mould Co., Ltd.

By certification [File Integrity]

Contact：mould(Mr.)

Email：

Telephone：

Phone：

Area：Zhejiang

Address：Zhejiang

Website：http://www.tsbestmould.com/ http://mould.hnsanjia.com/

PRODUCT DETAILS

1. Product introduction

Feature:

● We provide high precision, efficient mould and fast delivery.

● Using an internal parting surface that passes through the hot runner and is controlled by a sequence valve.

● One-stop service from design to mold testing.

Advantage:

● High quality, competitive price, quick response is our mission.

● Shorten the molding cycle and improve market competitiveness

● The project department is responsible for mold quality and schedule on behalf of the customer.

2. Product Specification of injection front bumper mould

Automotive bumper mold
Mould Name	injection front bumper mould
Mould Cavity	1 cavities
Mould size	According the sample size
Mould Material	45#, P20, H13, 718, 2738, NAK80, S136, etc.
Mould Life	300,000 shots
Runner System	Hot runner
Ejection system	Hydraulic Cylinder
Mould Running	Automatically
Design software	UG, PROE, CAD, etc.
Plastic material	PP
Process Machine	CNC, High Speed Carve, EDM, Wire Cut, Driller, Grinder, fly cutter,etc.
Package	Wooden Case/pallet

3. Product Application

4. Production Details

Free 3 D drawing service from plastic to injection moulding tool design.

5. Project Management

We pursue for the ISO international standard service procedure and take part in the quality education system to realize the quality control. Our quality policy is “Quality first, customer oriented and high quality service”. We accept the continuing education and strictly control the processing procedure to offer our old & new customers WEIYU products with best quality, reasonable price, and high quality service.

6. Mold Flow Analysis

Mold flow analysis refers to the use of data simulation software to complete the simulation of injection molding through the computer and simulate the process of mold injection. Some data results are obtained. Through these results, the mold program is evaluated to improve the mold design program and product design program.

7. Mould Manufacturing Standards

1) Mould external gauge

● Oil cylinder core pulling and ejection must be controlled by travel switch, reliable installation.

● Clamping device must be installed reliably, with locating pin, symmetrical installation, no less than 2 (1 small mold).

2) Ejection reset, Pull core and pick up

● The sliding parts have oil groove (except push rod and push tube), the surface is treated with nitriding, the hardness is HV700.(the large slider is required by the customer).

● Such as oil cylinder core-pulling molding part wall thickness, oil cylinder locking mechanism.

3) General pouring system (excluding hot runner)

● At point gate mold before a small bump, die after a pit should be appropriate.

● There is an extension section at the front of the shunt as a cold material hole.

4) Hot runner system

● Temperature control table to set temperature and real temperature error should be less than + 2 ℃, and the temperature control is sensitive.

● Cavity and hot nozzle installation hole through.

5) Molding parts, parting surface and exhaust slot

● Moving parts such as syringes and push rods that need to be pierced with the front die surface and small insert column with diameter less than 3mm shall be inserted into the front die.

● Each contact surface, penetration surface, parting surface must be developed and matched in place.

6) Packaging

● Spare parts, spare parts wearing parts should be complete and attached details.

● The mold must be packed in film.

8. Working Environment